High resolution

Tip	13mm Triangle
Ferrule	Aegis linen
Shaft	29"/58" standard cue length; Hard Rock Maple
Collar	Stainless Steel
Joint	Falcon Joint
Pin	5/16x14
Forearm	Dark grey stained curly maple forearm
Sleeve	Dark grey stained curly maple forearm
Ring	No ring
Wrap	Irish Linen
Bumper	Black rubber, push in, secured by a screw
Butt construction	2 pcs jointed butt
Weight	19 oz.
Warranty	Falcon Warranty
Stock #	NF1DGRY1

High resolution

High resolution

Falcon cues are warranted against material and manufacturing defects. If your cue has a flaw, simply contact the authorized dealer you purchased it from and they will handle the rest. The warranty applies to the Original Owner Only and is not transferable.

Our products are made to withstand enormous pressure from straight-line impact (general shooting, breaking...etc). However, please keep in mind that this is a product made of natural material. Misuse or abuse will eventually damage the product and will not becovered under warranty. Below we will list the most common types of cue defects, their causes and our warranty against each issue:

Side Pressure

Even an insignificant amount of side pressure can damage the cue in the long run: either externally - visible damage such as scratches and dings, or internally, creating an interior fracture in the wood. Even tiny fractures will be compounded over time, resulting in eventual surface cracks, breakage of the cue or warpage. Side pressure can be caused by leaning a cue against a wall, hitting the cue against any solid object (table, wall) or dropping the cue on the floor. Damages resulting from the above situations will not be covered under any circumstances. The only time your cue will be warranteed for lateral damage is when the damage can be proven to be due to a manufacturer's defect. If this is the case, the cue will break along the grain of the knot in the wood with out any dents or physical damage visible.

Warpage

Our cues are only warranteed against warpage if the cue is NEW and UNCHALKED! Please check for the straightness at the time of purchase. Chalking a cue means you accept the cue in the condition it was received. Please understand that after purchase, we have no control over how a cue is being treated and stored. Temperature and moisture play a crucial role in determining the stability of a natural piece of wood. Too hot, too cold or too moist can all perpetuate warpage and can be caused by simply leaving your cue in your car for even a short period of time! Therefore we assume no responsibility for warpage. Please note that wood is a natural product and can warp over time through no fault of the manufacturer. *FYI: A slightly warped butt will not affect your play.

Regular Repairs

All repairs for regular damage such as dings, refinishing, re-tipping...etc, can be done through the Falcon plant at the owner's expense (including shipping both ways). Please contact the nearest authorized dealer for further instructions. Allow 6-8 weeks for completion from the date which the cue is received by Falcon Cues.